HSN code 7202 — FERRO-ALLOYS
HSN · heading18%हिंदी में देखें · தமிழில் பார்க்க
FERRO-ALLOYS
Ferro-alloys are iron-based alloys containing one or more other elements (such as manganese, silicon, chromium, molybdenum, or vanadium) used primarily as additives in steelmaking to impart specific properties like strength, hardness, or corrosion resistance to steel.
current gst rate
| igst | cgst | sgst | condition |
|---|---|---|---|
| 18% | 9% | 9% | Sch II S.No 261 |
source: 9/2025-Central Tax (Rate) · effective 2025-09-22 · all codes at 18%
gst calculator — pre-filled with this rate
products commonly classified here
ferro alloyferroalloyferroalloys for steelferrochromeferromanganeseferromolybdenumferronickelferrosiliconferrotungstenferrovanadiumhigh carbon ferromanganesemedium carbon ferromanganesesilico manganesesilicomanganese
more specific codes
- 720211CONTAINING BY WEIGHT MORE THAN 2% OF CARBON
- 720219OTHER
- 720221CONTAINING BY WEIGHT MORE THAN 55% OF SILICON
- 720229OTHER
- 720230FERRO-SILICO-MANGANESE
- 720241CONTAINING BY WEIGHT MORE THAN 4% OF CARBON
- 720249OTHER
- 720250FERRO-SILICO-CHROMIUM
- 720260FERRO-NICKEL
- 720270FERRO-MOLYBDENUM
- 720280FERRO TUNGSTEN AND FERRO-SILICO-TUNGSTEN
- 720291FERRO-TITANIUM AND FERRO-SILICO-TITANIUM
- 720292FERRO-VANADIUM
- 720293FERRO-NIOBIUM
- 720299OTHER :
sibling codes
- 7201PIG IRON AND SPIEGELEISEN IN PIGS, BLOCKS OR OTHER PRIMARY FORMS
- 7203FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE AND OTHER SPONGY FERROUS PRODUCTS, IN
- 7204FERROUS WASTE AND SCRAP; REMELTING SCRAP INGOTS OF IRON OR STEEL
- 7205GRANULES AND POWDERS, OF PIG IRON, SPIEGELEISEN, IRON OR STEEL
- 7206IRON AND NON-ALLOY STEEL IN INGOTS OR OTHER PRIMARY FORMS (EXCLUDING IRON OF HEADING 7203)
- 7207SEMI-FINISHED PRODUCTS OF IRON OR NON-ALLOY STEEL
- 7208FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, HOT-ROLLED, NOT
- 7209FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, COLD- ROLLED (CO
- 7210FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF 600 MM OR MORE, CLAD, PLATED OR
- 7211FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM, NOT CLAD, PLAT
- 7212FLAT-ROLLED PRODUCTS OF IRON OR NON-ALLOY STEEL, OF A WIDTH OF LESS THAN 600 MM, CLAD, PLATED O
- 7213BARS AND RODS, HOT-ROLLED, IN IRREGULARLY WOUND COILS, OF IRON OR NON-ALLOY STEEL
Not sure this is the right code? Try the guided finder →
compiled from official sources · not tax advice · verify with your tax advisor before filing